Quad Leg Free Standing Aluminium Aerial Frame

• Our variable height Aerial Frame can be set up at 4 different heights with a maximum height of 6.5m (2.85m, 4m, 5.25m and 6.5m).
• The frame can be set up with 4 people in as little as 15 minutes with a step by step set up manual included
• There are 2 tie off points on 2 of the base leg sections, 1 cleat (best used when using a pulley system) and 1 eye bolt (best used for attaching a carabiner to).
• The frame can be set up on all types of terrain including, concrete, grass and sand.
• No additional tools or hardware are needed for setting up the Frame.
• The frame is suitable for, but not limited to, Lyra, Silks, Hammock, Single/Double Trapeze, Spanish web/Corde Lisse, Cube, Sphere.
• Some swinging/flying is possible within the base foot print of the frame. Swinging Trapeze is not possible.
• When using a pulley system we advise using minimum 2:1 but recommend a 5:1 system (triple pulley on top, double pulley under)

The Aerial Frame is Fully engineer certified. The Aerial Frame is made from 6061 T6 Aluminium tubing with Stainless steel shackles, eye bolts and aircraft cable from reputable suppliers used to secure components (each component is rated)

Maximum user weight should not exceed 160kgs. This allows a sufficient safety factor for shock/impact loading from dynamic drops and movements given a safety factor of 10:1. Total weight of the Frame is 120kg.

Components:

• Crane bar with removable ends, 4 x 10mm sleeve set bolts + 3 x eye bolts
• 20 x leg sections (1450mm length + 250mm sleeve)
  • 4 x top sections
  • 12 x standard leg sections
  • 4 x base sections
• 4 x base cables and SS shackles for set up at 6.5m height
• 2 x 11m 6mm braided rope for base support ropes when set up at lower heights
• 4 x rubber mats for bases

Optional extras NOT included:

• Climb Rope
• 2:1 pulley system
• 5:1 pulley system
• carabiners
• Swivel
• Safety mat

Maintenance and care:

Upon unpacking and before each and every set up check on crane bar eye bolts connections and ensure all bolts are tight. Check on all sections for any damage that may have occurred from dropping sections on hard surfaces. Ensure all sleeve set bolts are secure. Check base sections eyebolts are secure and tightened.

Disclaimer:

Set and use of any aerial apparatus and or structure holds inherent risks. You are about to set up a structure with multiple pieces and associated components weighing a total of 120kgs. You and those assisting in the set up and or use of the frame should be aware of the risks involved. Follow the step-by-step instruction manual for both set up and breakdown. Not following correct procedures could result in injury or death. Mid Air Circus Arts (MACA) holds no responsibility for the use or incorrect set up of the frame.